Advertisement
TENSOR - RETURN DESK ASSEMBLY INSTRUCTIONS
1
M8 Washer
(Serrated side of
washer facing up)
Steps:
1.
Install leg onto frame per illustration. Ensure the leg is fully seated onto
frame before tightening.
2.
Install M8x50mm screw with washer using provided Allen key.
3.
Repeat Step 2 for remaining leg.
To report any issues with this product, please contact our customer service department at (888) 552-5699
M8x50mm
2
1
For more information, visit www.sitonit.net
Allen key
No. C6257 Rev. A
Advertisement
Need help?
Do you have a question about the TENSOR and is the answer not in the manual?