Install the PA-220R Firewall on a Wall....................23 Install the PA-220R Firewall in a 19-inch Equipment Rack............25 Connect Power to a PA-220R Firewall............27 Prepare to Connect DC Power to a PA-220R Firewall..............29 Connect DC Power to a PA-220R Firewall..................30 PA-220R Firewall Specifications..............33 PA-220R Physical Specifications......................35...
Before You Begin Read the following topics before you install or service a Palo Alto Networks next-generation ® firewall or appliance. The following topics apply to all Palo Alto Networks firewalls and appliances except where noted. > Tamper Proof Statement >...
12-24VDC power inputs for power redundancy. First Supported Software Release: PAN-OS ® The following topics describe the hardware features and the status LEDs of the PA-220R firewall. To view or compare performance and capacity information, refer to the Product Selection tool.
PA-220R Front Panel The following image shows the front panel of the PA-220R firewall and the table describes each front-panel component. Item Component Description Screw-on ground point Use this ground point to connect the firewall to earth ground (ground cable not included).
PA-220R Back Panel The following image shows the back panel of the PA-220R firewall. The only usable components on the back panel are the two screw holes used to Install the PA-220R Firewall on a DIN Rail. There are also two DIN-bracket screw holes (not shown) on the bottom of the firewall.
PA-220R Status LEDs The following table describes how to interpret the status LEDs on the PA-220R firewall. Description PWR (Power) • Green—The firewall is powered on. • Off—The firewall is not powered on or an error occurred with the internal power system (for example, power is not within tolerance levels).
Install the PA-220R Firewall The PA-220R next-generation firewall ships with the hardware required to install the firewall on a flat surface or on a DIN rail. You can also order a wall-mount kit to install the firewall on a wall or a rack-mount kit to install the firewall in a 19” equipment rack.
Attach the rubber pads to the recessed circles on the bottom of the firewall and then place the firewall right-side up on a flat stable surface. PA-220R NEXT-GEN FIREWALL HARDWARE REFERENCE | Install the PA-220R Firewall 2018 Palo Alto Networks, Inc.
Install the PA-220R Firewall on a DIN Rail The following procedure describes how to install the PA-220R firewall using the DIN rail kit that is provided with the firewall. You can attach the DIN bracket to either the back or to the bottom surface of the firewall (choose the option that best fits the installation site).
Install the PA-220R Firewall on a Wall The following procedure describes how to install the PA-220R firewall on a wall using the wall-mount kit. You can purchase the wall-mount kit separately from the Palo Alto Networks Sales Department or an authorized reseller.
Install the PA-220R Firewall in a 19-inch Equipment Rack The following procedure describes how to install the PA-220R firewall in a two-post or four-post equipment rack using the 19-inch rack-mount kit. You can purchase the 19-inch rack-mount kit separately from the Palo Alto Networks Sales Department an authorized reseller.
Page 26
The weight of the product is not enough to require mounting to the rear posts of the four- post rack. PA-220R NEXT-GEN FIREWALL HARDWARE REFERENCE | Install the PA-220R Firewall...
The following topics describe how to prepare the hardware that is required to connect power to a PA-220R firewall and how to connect ground and DC power to the firewall. > Prepare to Connect DC Power to a PA-220R Firewall...
Connect DC Power to a PA-220R Firewall The following procedure describes how to connect DC power to a PA-220R firewall. Before you connect power, read the PA-220R Electrical Specifications Prepare to Connect DC Power to a PA-220R Firewall. The DC terminal block for connecting the DC power cables to the firewall is included in the PA-220R accessories kit.
PA-220R Firewall Specifications The following topics describe the hardware specifications for the PA-220R firewall. For feature, capacity, and performance information, refer to the PA-220R firewall datasheet. > PA-220R Physical Specifications > PA-220R Electrical Specifications > PA-220R Environmental Specifications > PA-220R Miscellaneous Specifications...
The following table describes PA-220R firewall miscellaneous specifications. Specification Value Storage capacity One 32GB solid-state drive (SSD) for the PAN-OS system files, system logs, and network traffic logs. Mean time between failures (MTBF) 29 years PA-220R NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-220R Firewall Specifications...
Our products meet standards for product safety and electromagnetic compatibility when used for their intended purpose. To view compliance statements for the PA-220R firewall, see PA-220R Firewall Hardware Compliance Statements.
Interference by Information Technology Equipment (VCCI), which governs radio frequency emissions in Japan. The following information is in accordance to VCCI Class A requirements: PA-220R NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-220R Firewall Hardware Compliance Statements Overview 2018 Palo Alto Networks, Inc.
Page 42
Translation: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take corrective actions. PA-220R NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-220R Firewall Hardware Compliance Statements Overview...