PA-220 Firewall Overview
PA-220 Front Panel
The following image shows the front panel of the PA-220 firewall and the table describes each
front panel component.
Item
1
2
3
PA-220 Next-Gen Firewall Hardware Reference
Component
Ethernet ports
MGT port
CONSOLE port
(RJ-45)
14
Descripon
Eight RJ-45
10/100/1000Mbps ports for
network traffic.
You can set the link speed
and duplex or choose auto-
negoate.
Use this Ethernet
10/100/1000Mbps port
to access the management
web interface and perform
administrave tasks. The
firewall also uses this port
for management services,
such as retrieving licenses
and updang threat and
applicaon signatures.
Use this port to connect a
management computer to the
firewall using a 9-pin serial
to RJ-45 cable and terminal
emulaon soware.
The console connecon
provides access to firewall
boot messages, the
Maintenance Recovery Tool
(MRT), and the command line
interface (CLI).
2021 Palo Alto Networks, Inc.
©