Wiring - Omron V720 Series Operation Manual

Wiring

4-5 Wiring
4-5-1
Power Supply and Ground Wires
Wire the Controller as shown below.
Connection example
+24 VDC
0 V
The power supply and ground terminals use M3 set screws. The following
type of solderless terminals can be connected to these terminals. Tighten
each screw to a torque of approximately 6 kgf • cm.
Line filter
Section 4-5
V720-CD1D
Ferrite core (provided)
Ground at a resistance
100 W
of less than 100Ω
4-11