Setup Of The Motors And Encoder; Wiring Devices - Omron CK5M-CPU1 1 Series Application Manual

3-4

Setup of the Motors and Encoder

3-4-1

Wiring Devices

The figures below show how to wire the CK3M to the Servo Drive and linear motors.
• Wiring of the X axis
S8VK-S12024
• Wiring of the Y axis
S8VK-S12024
Connect the sections a, b, and c in the above figures as follows.
a. Connection between the Controller and the servo amplifier
Connect the amplifier connector of the CK3W-AX2323£ to the C2 connector of the servo amplifier
with the following dedicated cable.
Manufacturer
OMRON
Application Guide Laser Application (O052)
a
CK3A-G310L
a
CK3A-G310L
Name Model
Direct PWM Cable CK3W-CAAD009A 0.9 m
CK3W-CAAD018A 1.8 m
CK3W-CAAD036A 3.6 m
3 Connection Procedures
CK3W-AX2323
CK3W-GC2200
c
b
INC-5723, LIDA48
CK3W-AX2323
CK3W-GC2200
c
b
INC-5716, LIDA48
Length
3
3-21