Table of Contents
Advertisement
FCC Notices
7
EN/IEC Standards
WARNING
!
8
FCC Notices
xiv
· In connection with EC unification, eighteen European countries will
integrate their conventional safety standards into EN standards. When the
EN standards come into effect, they will apply as the unified European
standards in place of the conventional safety standards.
· EN standards are based on IEC standards. Therefore, machines that are
exported to Europe from Asia or North America must satisfy EN standards.
Otherwise, the machines must satisfy IEC standards if the machines do not
fall under EN standards.
· The CE marking is provided by EC Directives. A product bearing
a CE marking meets the safety standards specified by all
relevant EC Directives. If the product is a machine, it must satisfy
the EC Machinery Directive, Low-voltage Directive (LVD), and
EMC requirements of the EC Directives. The product must satisfy
the EMC and LVD requirements of the EC Directives, if the
product is a home electronics appliance or office machine.
Machines bearing CE markings can be freely exported to
European countries. In other words, a CE marking is the passport
for export to Europe.
· EC Directives are provided for the purpose of European unification.
Approximately 300 EC Directives have been passed. EC Directives for
machines are called Machine Directives. According to the Machine
Directives (EC Directive Document number 89/392/EEC), machines
exported to Europe on and after January 1, 1995 must bear CE markings.
· EMC standards are for electromagnetic compatibility. A machine must
satisfy the EMC requirements of EC directives by taking countermeasures
against EMI (electromagnetic interference) and EMC (electromagnetic
susceptibility).
Electromagnetic Inductive RFID System
The V720-CD1D/CD2D satisfies the following EC Directives.
ID Controller EMC Directives
V720-
EMI Standard:
CD1D/CD2D
EN55022
EMS Standard:
EN55024
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Remarks
Attach a ferrite core (TDK
ZCAT2032-0930) each to the
DC power supply line and FG
line of the Controller.
8
Advertisement
Table of Contents
