4.18 Power Button Board and Switch Board
4.18 Power Button Board and Switch Board
Removing the Power Button Board and Switch Board
Remove the Power Button Board and Switch Board according to the following procedures
and Figures 4-33.
1. Remove two M2x3 black flat head screws.
2. Remove the Power button board.
3. Remove two M2x3 black flat head screws.
4. Remove the switch board.
5. Disconnect the switch board flat cables from CN1 on the switch board.
Figure 4-33 Removing the power button board and switch board
Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual
Switch board
Switch board flat cable
4 Replacement Procedures
M2x3 black flat head screw
CN1
Power button board
4-55