Technical Specifications; Electrical Specification; I-Drive Power Maintenance - LINET Sprint 200 Instructions For Use And Technical Description

13.11.11 Technical Specifications
Parameter
i-Drive Power wheel diameter
Max. fast forward speed (flat ground, loaded)
Max. forward speed (flat ground, loaded)
Max. reverse speed (flat ground, loaded)
Max. angle of ascent
13.11.12 Electrical specification
Parameter
Input Voltage, Frequency
Batteries Voltage
Maximum Power Input
Fuse
Version 230 V
Version 127 V
Version 120 V
Version 110 V
Version 100 V

13.11.13 i-Drive Power Maintenance

Periodical maintenance of the i-Drive Power must be done by qualified service technician or authorized service organization at least
once a year. To continue maintenance please see chapter Maintenance.
Service technician must check the following:
► accumulator status and eventual replacement of the accumulator (after maximum of three years of duty)
► shock absorber function
► i-Drive Power wheel – replace if necessary
► lifting mechanism – grease if necessary
► cables, control elements – replace if necessary
► i-Drive Power function
D9U001ES2-0101_02
Value
21 cm
4,43 km/h (±15%)
2,16 km/h (±15%)
2,16 km/h (±15%)
6°
Value
230 V AC, 50/60 Hz
127 V AC, 50/60 Hz
120 V AC, 50/60 Hz
110 V AC, 50/60 Hz
100 V AC, 50/60 Hz
12 V DC, Capacity: 9 Ah
300 W
2 x T1,6A L 250V
2 x T3,15A L 250V
2 x T3,15A L 250V
2 x T3,15A L 250V
2 x T3,15A L 250V
77