Paper Roll Holder - LINET Sprint 200 Instructions For Use And Technical Description

15.5 Paper Roll Holder

Paper Roll Holder is intended for holding a paper bed sheet.
Paper Roll Holder can only be used with the specific Sprint 200 configuration enabling the correct placement of the Paper Roll
Holder.
Paper Roll Holder must be located at foot end of Sprint 200.
On the both stretcher ends, the paper bed sheet must be fixed under the mattress.
Maximum width of the bed sheet roll is 61 cm.
Fig. Paper Roll Holder with two nibs
Fig. Two optional holders of the Paper Roll Holder
To insert the Paper Roll Holder to the optional holders at foot end of the Sprint 200:
► Insert both nibs of the Paper Roll Holder to both openings in the optional holders at foot end of the Sprint 200 carefully.
► Place the Paper Roll Holder on the foot end of the Sprint 200 carefully to prevent the Paper Roll Holder from falling on the
Sprint 200.
To remove the Paper Roll Holder:
► Take the Paper Roll Holder out carefully to avoid lifting the stretcher foot end together with the Paper Roll Holder.
90 D9U001ES2-0101_02