Service Cal Data Softkey Menus - HP 8560E Service Manual

General Troubleshooting
Introduction

Service Cal Data Softkey Menus

The jumper on jack A2J12 is shipped from the factory in the WR PROT
(write protect) position (jumper on pins 2 and 3). When the jumper is
set to the WR ENA (write enable) position (jumper on pins 1 and 2), an
additional service cal data menu is displayed under . Figure 6-5 on
CAL
page 289 illustrates those areas of the service cal data menu that are
available.
288 Chapter 6