HP 8560E Service Manual page 655

Component-Level Information Packets
Introduction
Introduction
Information for repairable assemblies is provided in Component-Level
Information Packets (CLIPs). Each CLIP contains a parts list,
component-location diagram, and schematic diagram. Each CLIP has a
part number that is changed whenever the related instrument
assembly is changed.
Updated or replacement CLIPs may be ordered through your local
Agilent Technologies Sales or Service Office. Use the CLIP part
numbers provided in Table 14-1.
A single volume CLIP set that contains all repairable assemblies for the
8560 E-series and EC-series is also available. Order this CLIP set by
using part number 5967-8582.
With the exception of the A2 controller board, the A1A1 keyboard, and
the A17 CRT Driver board, the E-series assemblies for which CLIPs
have been generated are identical to the same assemblies in EC-series
instruments.
Each of the CLIPs in the CLIP set can be ordered individually.
CLIPs may be unavailable for recently introduced assemblies.
NOTE
654 Chapter 13