that the coaxial cables are routed properly on the clip as illustrated
in
3-13 on page 176
6. Lay the A2, A3, A4, and A5 assemblies flat against each other in the
folded-out position. Make sure that no cables become pinched
between the two assemblies.
Assembly Cables (1 of 3) − EC-Series
Figure 3-9
Chapter 3
Figure 3-12 on page 175
for E-series instruments.
Procedure 5. A2, A3, A4, and A5 Assemblies
for EC-series instruments, and in
Assembly Replacement
Figure
173