HP 8560E Service Manual page 40

Table 1-3 Recommended Test Equipment
Instrument Critical Specifications for Equipment Substitution
Cable, 50 Ω
Connectors: BNC (m)
coaxial
(five required) Length: ≥ 122 cm (48 in.)
Cable Frequency range: 30 Hz to 26.5 GHz
(two required) Maximum SWR: <1.4 at 26.5 GHz
Maximum insertion loss: 3 dB
Connectors: APC 3.5 (m), both ends
Length: ≥ 61 cm (24 in.)
Cable Frequency range: 30 Hz to 50 GHz
(for HP 8564E Maximum SWR: <1.55 at 50 GHz
and HP Maximum insertion loss: 5.75 dB
8565E)
Connectors: 2.4 mm (f) to 2.4 mm (m)
Length: ≥ 1 m (39 in.)
Cable, HP-IB Required w/operation verification software
(eight Required w/HP 85629B test & adjustment module
required)
Length: 2 m (6.6 ft.)
Adapters
Adapter Type N(f)-to-BNC(m)
Adapter Type N(m)-to-BNC(f)
(three
required)
Adapter Type N(f)-to-BNC(f)
Adapter Type N(m)-to-N(m)
Adapter Type N(f)-to-APC 3.5(m)
Adapter Type N(m)-to-APC 3.5(m)
(two required)
Adapter Type N(m)-to-APC 3.5(f)
* Part of microwave workstation
P = performance tests; A = adjustments; M = test & adjustment module; T = troubleshooting;
V = operation verification
Chapter 1
General Information
Recommended Test Equipment
Recommended Use
Model
HP 10503A P,A,V
P,A,M,V
8120-4921
8120-6164 P,A,V,T
HP 10833B P,A,M
P,A
1250-1477
1250-1476 P,A,V
1250-1474 P,V
1250-1475 P
1250-1750 A
1250-1743 P,M,V
1250-1744 P,V
39