Copy And Scan Problems - Xerox VersaLink C71 Series User Manual

Copy and Scan Problems

If the copy or scan quality is poor, refer to the following table.
S S Y Y M M P P T T O O M M S S
Lines or streaks only present in copies made from the
document feeder.
Spots present in copies taken from the document glass.
Image is too light or too dark.
Image quality is poor when scanning color original
documents.
Colors are inaccurate.
If the problem persists, for online support information, go to www.xerox.com/office/VLC71XXsupport.
Xerox ® VersaLink ® C71XX Series Color Multifunction Printer User Guide
S S O O L L U U T T I I O O N N S S
There is debris on the CVT glass. When scanning, the
paper from the document feeder passes over the debris
on the glass surfaces, resulting in lines and streaks.
Clean all glass surfaces with a lint-free cloth dampened
with water. For details, refer to
There is debris on the document glass. When scanning,
the debris creates a spot on the image. Clean all glass
surfaces with a lint-free cloth dampened with water.
Adjust the lighten/darken setting.
For best results, select Black & White output.
Adjust color settings and confirm that the correct
Original Type is set.
Perform the Scan Color Consistency procedure. For
details, refer to Color Registration.
Troubleshooting
Cleaning the Scanner.
257