Linking The Transmitter; Ruko Drone App; Home - RUKO F11GIM User's Manual - Safety Manual

4.4 Linking the Transmitter

Before each aircraft flight, you need to link with the Transmitter.
After the linking is successful, you can control the flight of the
Aircraft. The steps for the pairing are as follows:
• Turn on Aircraft
• Turn on Transmitter
• Flick the left stick of Transmitter up and down, and after the
Aircraft emits a beep, it means the linking is successful.
• Connect your mobile phone to Aircraft's WiFi "RUKO-GIM-******",
tap the app to enter the control interface; the mobile phone screen
displays information such as the Transmitter's battery signal and
camera screen.
If the connection is successful, the Aircraft light will turn pink.
Before each flight, check the power of the Transmitter. The
Transmitter will "beep" when the battery is low. The Transmitter will
automatically shut down after 10 minutes of inactivity. Toggle the
joystick or press any button to restore the Transmitter to its normal
working state.
When using the Transmitter handle to hold a mobile device, be sure
to press it firmly to prevent the mobile device from slipping off.
Keep the battery at around 3.8-3.9V, and recharge it every 1 month
or so to keep the battery active.

5 Ruko Drone App

5.1 Home

After running RUKO DRONE App, enter the homepage.
F 11 GIM User Manual
Copyright ©2022 Ruko All Rights Reserved.
36