Safety Instructions, Regarding Hydraulic System - HE-VA Top-Strigle Operating Instructions Manual

UK
Most accidents when operating the machine, transporting and doing maintenance occurs, when
avoiding the most simple safety regulations.
For this reason, it is of highest importance, that any person who is operating the machine, strictly
follows the safety regulations and other instructions, which belongs the machine.
The machine must only be operated, maintained and fixed by persons, who is confidential with and
skilled for this work and is aware of moments of danger, which can occur.
ATTENTION!! Rotating parts and clothes in a loose condition, is a dangerous combination.
IMPORTANT!! It is strictly prohibited for any person to take place on the frame or chassis
of the machine, when it is either operating or the tractor is idling.
Instructions for transport at public roads:
Before transport at public roads, make sure that the attachment of the implement to the tractor, is in
accordance with the local rules and regulations in force (permitted total weight, permitted axel load,
transport width, lights and warning signs).
When driving at public roads, the tines must be folded towards the frame. This will reduce
the width of the machine substantially.
Front axel load
:
When the implement is attached and at maximum load, the tractors driving properties must be
ensured. Check that the front axel is sufficiently loaded. The front axel load must be at least 20% of
the tractors weight. Permitted axel load and total weight for the tractor must be respected.
NB! The driving, controlling and braking properties are affected by the attached implement.

Safety instructions, regarding Hydraulic System

• The highest allowable pressure, is 225 bar.
• It is recommended to mark the hydraulic connections between the implement and tractor, to
avoid incorrect operation!
• When checking for hydraulic leeks, suitable safety gear must be used due to danger. (Safety,
goggles, gloves, etc.)
At high pressure, hydraulic oil can penetrate the skin and course serious injuries.
• Before any work at the hydraulic system, the implement must be lowered to solid ground.
Pressure must be relieved, engine stopped, and ignition key removed.
Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 m 2 Bars
7
Back to the table of contents
30-11-2020