Table of Contents
Advertisement
Define default job processing
Define default job processing
Go to the printing workflow settings
1. Open the Settings Editor and go to: [Preferences]→[System settings].
[110] [System settings] tab
Define the processing of jobs submitted via LPD/LPR
The printer protocol LPD can be enabled by the system administrator. The print protocol LPR
must be installed on the workstation that submits the jobs.
1. Use the [LPD] function to indicate when the RIP starts to process LPR jobs.
• [Streaming]: is default value and applicable to large jobs. The job is processed by the RIP
and printing can start at the same time.
• [Receive, then print while RIP is in progress]: is applicable to for smaller jobs that have
multiple sets. The RIP starts to process the jobs after they arrive in the print queue and
before the whole job has been received.
[111] LPR
2. Click [OK].
Define the processing of jobs that use the socket printing port
Socket printing can be enabled and configured by the system administrator.
1. Use the [Socket printing] function to indicate when the RIP starts to process jobs that use the
socket printing port.
• [Streaming]: is default value and applicable to large jobs. The job is processed by the RIP
and printing can start at the same time.
• [Receive, then print while RIP is in progress]: is applicable to for smaller jobs that have
multiple sets. The RIP starts to process the jobs after they arrive in the print queue and
before the whole job has been received.
90
Chapter 5 - Define defaults
VarioPrint i-series MICR
Advertisement
Table of Contents
