Table of Contents
Advertisement
[481] Nozzle failure detection interval
6. Click [OK].
Indicate if media are suitable for quality control sheets
The media definition includes an optimization parameter that indicates if media and media sides
are suitable for quality control sheets.
[482] Media optimization parameters
If the printer prints a job on media that cannot be used for quality control sheets, alternative
media are used for quality control sheets. These alternative media are used for all job media that
are not suitable for quality control sheets.
NOTE
The media of the next sheet to print determine if the alternative media are used for a next quality
control sheet. As a consequence, when a job has mixed media, quality control sheets can be
printed on job media and also on alternative media.
Define the default media for quality control sheets
It is important to configure alternative media with the correct size to prevent extra printhead
maintenance and to keep the job productivity high. Ensure that the alternative media size meets
all job media that are not suitable for quality control sheets.
Configure and load alternative media of which:
• the direction in Z (cross-feed) direction is at least as large as the job media in Z-direction
• the direction in X (feed) direction is not larger than the job media in X-direction.
VarioPrint i-series MICR
Define usage of quality control sheets
Chapter 12 - Print what you expect
401
Advertisement
Table of Contents
