Table of Contents
Advertisement
Configure automatic wake-up
When do you use automatic wake-up
The sleep mode is activated when you press the sleep button
expires.
Automatic wake-up awakes the printer from sleep mode at the configured times. You can also
use the sleep button
NOTE
Automatic wake-up only works for the sleep mode and is not applicable to the shutdown mode.
Configure automatic wake-up
1. Open the Settings Editor and go to: [Preferences]→[System settings]→[Energy save modes].
[316] [System settings] tab
2. Enable and configure the sleep mode.
3. Use the [Automatic wake-up] function to enable automatic wake-up.
[317] Automatic awakening
4. Set the wake-up timers. Indicate for each day if an automatic wake-up occurs. Define the
wake-up time per day.
[318] Automatic wake-up time
More information
•
Learn about energy save modes on page 258
Configure automatic wake-up on page 265
•
Configure the sleep mode on page 264
•
VarioPrint i-series MICR
to awake the printer from sleep mode.
Configure automatic wake-up
or when the sleep-mode timer
Chapter 9 - Save energy
265
Advertisement
Table of Contents
