Replace Printer Parts; Replace The Flip Rings Of The High Capacity Stacker - Canon VarioPrint MICR i Series Operation Manual

Replace printer parts

Replace printer parts

Replace the flip rings of the high capacity stacker

The dashboard indicates when you must prepare the replacement of the four flip rings.
The print system notices that maintenance is needed and shows the message that flip
rings must be replaced in high capacity stacker 1 or 2.
[524] Location of the high capacity stackers
Before you begin
• You need to have the rights to access the maintenance tasks.
• You need a set of new flip rings.
Procedure
Action
1 1. Touch the maintenance
key symbol on the dash-
board.
2. Touch [Stacker: Replace
flip rings]→[Replace flip
rings of stacker 1] or [Re-
place flip rings of stacker
2].
446 Chapter 13 - Maintain the printer
4
VarioPrint i-series MICR