Table of Contents
Advertisement
Perform a color validation test
Perform a color validation test
VarioPrint i-series MICR color validation tests provide an objective method to check the color
reproduction of the printer on the selected media.
You perform the test with media that have been calibrated just before the color validation. The
target charts are printed on these media.
Print cleaning sheets before the test charts
1. Open the Settings Editor and go to: [Color]→[Color validation & verification].
[502] [Color validation & verification] tab
2. Click [Configure].
[503] [Color validation tests] menu
3. Use the [Print cleaning sheets before test charts] option to indicate if you want to print
cleaning sheets before the charts are printed.
[504] Configure color validation
Print the target charts
1. Calibrate the media family of the target media.
2. Load and assign approximately 10 sheets of the target media in one of the paper trays.
3. Touch [System]→[Media].
4. Select the target media.
5. Touch [Validate].
418
Chapter 12 - Print what you expect
VarioPrint i-series MICR
Advertisement
Table of Contents
