Table of Contents
Advertisement
Choose a workflow profile
[200] Confirm start of job
1. Select the workflow profile.
2. Use the [Confirm start of job] function to select the one of the following values.
• [On]: Confirm that a job can start.
• [Confirm start of job: In case of conflicting settings]: Confirm that a job can start with
default settings in case the job has conflicting settings.
• [Confirm start of job: In case of conflicting print quality settings]: Confirm that a job can
start with default settings in case the job has conflicting print quality settings. The
requested media print mode is unknown. The job will be printed with the default media
print mode instead of the requested media print mode.
You can decide to cancel the job and first create the required media print mode in the
Settings Editor.
Define tray linking
You can enable or disable the linking of output trays, when there are two high capacity stackers.
Tray linking means that the prints delivery automatically switches to the other high capacity
stacker.
[201] Attributes of a workflow profile
1. Select the workflow profile.
2. Use the [Tray linking] function to indicate if tray linking can occur.
• [Never]: there is no tray linking.
160
Chapter 8 - Document printing
VarioPrint i-series MICR
Advertisement
Table of Contents
