Assign media from media catalog to paper trays
[120] Paper tray button
1. Press the paper tray button
2. Select a paper tray in which you want to load the media and touch [Open].
3. Remove and rewrap media in the original packaging or other moistureproof material, if
applicable.
4. Prepare and load the media in the paper tray.
5. Close the paper tray.
6. Touch [Assign] to open the media catalog.
7. Select the media and touch [OK]. For a quick search use the search and filter functions.
8. Press the paper tray button
NOTE
Use the [Unassign] function to unassign the media. You can also unassign media via a button on
the control panel of the paper module.
More information
Work with the schedule in transaction printing mode on page 118
•
Work with the schedule in document printing mode on page 166
•
Unpack the media on page 102
•
•
Load media into the paper module on page 104
Control panel of the paper module on page 30
•
100
Chapter 6 - Job media handling
at the right-hand side of the control panel.
at the right-hand side of the control panel.
VarioPrint i-series MICR