Table of Contents
Advertisement
Clean the SZ-rollers in the print module
Action
5
1. Wait for about 10 seconds to
let the rollers absorb the PML.
2. Clean the upper and lower
pair of rollers. Rub the moist
cloth across the rollers from
the side until all pollution is
gone.
Turn the rollers to clean the
complete surface.
6
Close the paper guide with the green handles.
7
Close the upper and the lower front doors of the print module.
8
On the control panel touch [Lock print module] to lock the doors.
After you finish
Dispose the used cleaning cloths.
472
Chapter 13 - Maintain the printer
NOTE
The color of the roller
can change but this can-
not damage the printer.
VarioPrint i-series MICR
Advertisement
Table of Contents
