Features & Controls - Briggs & Stratton 073049 Operator's Manual

Features & Controls
Read entire operator's manual before you attempt to assemble or operate your new water pump.
Compare the illustrations with your water pump, to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
A - Priming Plug — Fill pump with water here to prime
pump before starting.
B - Air Cleaner — Protects engine by filtering dust
and debris out of intake air.
C - Spark Plug — Always disconnect spark plug wire
when servicing water pump.
D - Engine Controls — Used for starting, stopping,
and setting engine speed.
E - Fuel Valve — Used to turn fuel supply on and off to
engine.
F - Oil Fill Cap — Check and add engine oil here.
G - Oil Drain Plug — Drain engine oil here.
H - Engine Information — Stamped on the side of the
fuel tank. Provides model, type and code number
of engine.
J - Water Drain Plug — Remove to drain water
from pump and to flush internal components with
clean water.
K - ID Label — Provides model and serial number of
water pump.
L - Suction Inlet — Connect reinforced suction hose
here.
M - Discharge Outlet — Connect discharge hose
here.
N - Recoil Starter — Used for manually starting the
engine.
P - Fuel Tank — Fill tank with regular unleaded fuel
here. Always leave room for fuel expansion.
P
N
M
L
K
J
7