Features & Controls - Briggs & Stratton 073046 Operator's Manual

Features & Controls
Read entire operator's manual before you attempt to assemble or operate your new water pump.
Compare the illustrations with your water pump, to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
A - Air Cleaner — Protects engine by filtering dust
and debris out of intake air.
B - Spark Plug — Always disconnect spark plug wire
when servicing water pump.
C - Engine Controls — Used for starting, stopping,
and setting engine speed.
D - Fuel Valve — Used to turn fuel supply on and off
to engine.
E - Oil Fill Cap/Dipstick — Check and add engine oil
here.
F - Oil Drain Plug — Drain engine oil here.
G - ID Label — Provides model and serial number of
water pump.
H - Engine Information — Stamped on the side
of the fuel tank. Provides model, type and code
number of engine.
J - Water Drain Plug — Remove to drain water
from pump and to flush internal components with
clean water.
K - Suction Inlet — Connect reinforced suction hose
here.
L - Discharge Outlets — Connect discharge hose
here.
M - Priming Plug — Fill pump with water here to prime
pump before starting.
N - Recoil Starter — Used for manually starting the
engine.
P - Fuel Tank — Fill tank with regular unleaded fuel
here. Always leave room for fuel expansion.
P
N
M
L
K
J
7