Hydraulic System: Checking Fluid Level - Audi A8 2003 Maintenance Manual

– Position puller - T10166- and detach all ignition coils from
spark plugs one after the other in direction of -arrow-.
– Unscrew spark plugs from cylinder head using spark plug
socket - VAS 3122B- .
Step 2 - removing spark plugs, cylinder bank (right-side):
– Remove right section of intake manifold ⇒ Rep. gr. 24 ; Serv‐
icing Mototronic injection system; Removing and installing
right section of intake manifold .
– Release connectors -1- for ignition coils -2- and unplug all
connectors from ignition coils simultaneously.
– Position puller - T10166- and detach all ignition coils from
spark plugs one after the other in direction of -arrow-.
– Unscrew spark plugs from cylinder head using spark plug
socket - VAS 3122B- .
Step 3 - installing spark plugs:
– Install new spark plugs using spark plug socket and extension
- VAS 3122B- and tighten to specified torque (table
⇒ page 84 ).
– Fit all ignition coils loosely into spark plug apertures and align
with connectors.
– Push ignition coils evenly onto spark plugs by hand (do not
attempt to knock in coils with any kind of tool).
– Plug all connectors evenly onto ignition coils, making sure they
engage.
Continue installation in reverse sequence.
3.46

Hydraulic system: checking fluid level

6-cylinder petrol engine and 6-cylinder diesel engine
⇒ page 85
10-cylinder petrol engine, 12-cylinder petrol engine and 8-cylinder
diesel engine ⇒ page 86
3.46.1 6-cylinder petrol engine and 6-cylinder
diesel engine
Table of test values and procedure guidelines:
Hydraulic fluid temperature: Fluid level specification:
Ambient temperature (ap‐
prox. 20℃)
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Fluid level close to MIN marking (up to 2 mm above or below marking)
Audi A8 2003 ➤
Maintenance - Edition 06.2014
3. Maintenance
85