Audi A8 2003 Maintenance Manual page 88

Hide thumbs Also See for A8 2003:

Table of Contents

Audi A8 2003 ➤

Maintenance - Edition 06.2014

♦ Spark plug socket and extension - 3122B-

♦ Puller - T10166-

♦ Torque wrench - V.A.G 1331- , measuring range 6 to 50 Nm

Table of tightening torques for installation:

Component/fastener

Spark plugs

Step 1 - removing spark plugs, cylinder bank (left-side):

– Remove intake manifold (top section) ⇒ Rep. gr. 24 ; Serv‐

icing Mototronic injection system; Removing and installing

intake manifold (top section) .

– Remove left section of intake manifold ⇒ Rep. gr. 24 ; Serv‐

icing Mototronic injection system; Removing and installing left

section of intake manifold .

– Release connectors -1- for ignition coils -2- and unplug all

connectors from ignition coils simultaneously.

3. Maintenance

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

[Nm]

Table of Contents