Preparations; Vehicle: Raising - Audi A8 2003 Maintenance Manual

2

Preparations

Vehicle: raising

⇒ page 7
Engine cover panel: removing and installing
Noise insulation: removing and installing
Window regulators: activating automatic open/close function
⇒ page 14
Vehicle diagnostic tester: connecting
2.1 Vehicle: raising
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Caution
Risk of damage to vehicle due to incorrect use of lifting plat‐
form.
♦ Do not exceed the permissible lifting capacity of the lifting
platform.
♦ The vehicle should be lifted only at the points shown in the
illustration.
♦ Position support plates so that they are aligned centrally
below the lifting points.
♦ Ensure sufficient clearance between low-mounted vehicle
components and the lifting platform.
Procedure:
– For vehicles with adaptive air suspension: Activate jacking
mode before lifting vehicle
– Front: Position support plates of lifting platform under plastic
mountings -arrow- on underside of side member trim.
⇒ page 9
⇒ page 13
⇒ page 14
⇒ page 8 .
Audi A8 2003 ➤
Maintenance - Edition 06.2014
7
2. Preparations