Audi A8 2003 Maintenance Manual page 85

Hide thumbs Also See for A8 2003:

Table of Contents

♦ Puller - T40039-

♦ Torque screwdriver - V.A.G 1624- , measuring range 1 to 5

♦ Torque wrench - V.A.G 1331- , measuring range 6 to 50 Nm

Table of tightening torques for installation:

Component/fastener

Spark plugs

Guide for ignition coil wiring to cyl‐

inder head cover

Securing bolts for connector rail

Step 1 - removing spark plugs, cylinder bank (right-side):

– Remove engine cover panel

– Release hose clips -arrows- and detach air pipe.

– Move air pipe to one side with vacuum hoses -1- and -2- at‐

tached.

– Unplug electrical connector from air mass meter - G70- .

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

[Nm]

⇒ page 9

Audi A8 2003 ➤

Maintenance - Edition 06.2014

3. Maintenance

Table of Contents