Audi A8 2003 Maintenance Manual page 102

Audi A8 2003 ➤
Maintenance - Edition 06.2014
– Take out air filter element.
Step 3 - installing air filter elements:
– Check for dirt in housing and water drains and clean if neces‐
sary ⇒ page 101 .
– Insert new air filter elements centrally in mounting in air clean‐
er (bottom section).
– Carefully fit air cleaner (top section) onto air cleaner (bottom
section) without applying any significant force, and tighten
bolts to specified torque (see table of tightening torques for
installation ⇒ page 97
of air cleaner are flush.
Continue installation in reverse sequence. Note tightening torque
⇒ page 97 .
3.48.6 6-cyl. diesel engine 3.0 ltr. TDI
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1783- , measuring range 2 to 10 Nm
Table of tightening torques for installation:
Component/fastener:
Securing bolts for air cleaner (top section) 3.5
Securing bolt for cover
Step 1 - removing air filter element:
– Remove fasteners -1-, unscrew securing bolt -2- and detach
cover in direction of -arrows-.
98
3. Maintenance
). Ensure that top and bottom sections
[Nm]
4.5
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.