For extra firm support during patient addition/removal, wound care, patient
turning, or patient hygiene procedures, it is recommended to set the mattress
pressure to max by pressing
Turn Options
Uni-Lateral Turn
Bi-lateral Turn
Selecting
Max Flow
returning to the
Turn Times To set therapy turn times, press the
Turn times are only considered when the pump is operating in
To Deflate and Store the Bari-Breeze Mattress
To deflate the Bari-Breeze mattress:
To store the mattress
To cancel
Max Flow
press the
more than 15 minutes, press
quickly again to enter
After 15 minutes,
button.
To enter uni-lateral
cycle through until
confirmed by the illuminated blue LED.
To enter bi-lateral
is indicated, this is confirmed by the illuminated
blue LED.
will cancel any
( ) setting.
Static
the desired time is indicated, this is confirmed by the
illuminated blue LED.
1. Activate the CPR control to deflate the mattress.
2. Remove the side bolster and safety air pad plug
from the connector on the mattress hose assembly.
Following deflation:
Roll the mattress from the head end toward the foot end,
ensuring the tubeset lies safely within the mattress.
12
and to enter
button once. To continue
for a further 15 minutes.
Max Flow
is automatically cancelled.
Max Flow
mode, press the
Turn
or
is indicated, this is
mode, press the
Turn
options set, resulting in the system
Turn
mode settings,
Turn
for
Max Flow
once to cancel, and
button to
button until
button until
mode.
Turn