Arjohuntleigh Bari-Breeze User Manual page 9

21 polyurethane cells approximately 200mm (8") high
Cells
providing support to the patient.
Manufactured from material to reduce accidental
Tubeset
kinking.
Located at the pump end of the tubeset is a specially
Tubeset Connector/CPR
designed twin snap lock connector. This design helps
prevent accidental disconnection of the mattress from
the pump. Releasing the connector allows the air to
escape from the cells in approximately 10 seconds to
facilitate CPR.
The mattress is totally enclosed in a double zipped
Cover
cover. The top and sides of the cover are constructed
from a two-way stretch and water resistant material,
which is vapour permeable for maximum patient
comfort. The base of the cover is constructed from a
tough abrasion resistant material and is fitted with bed
attachment straps.
A 50 mm (2") thick sub-mattress made of a single air-
Safety Air Pad
filled cell enclosed in the base to support the patient in
the event of loss of air pressure in the mattress.
Two safety side air bolsters provide comfort and support
Bolsters
during mode.
Turn
The safety air plug is used to deflate both the side
Safety Air Plug
bolsters and safety air pad. It is located close to the
tubeset/pump connector.
3