Table of Contents
Advertisement
2.4 Display options
2.4.1 Displayed while a program is running
2.4.2 Display after program end
10
A service technician can set the information to be shown in the
display.
The display can be set to show one of the following alternatives
while a program is running:
•
Temperature
•
A
value
0
•
A
value / Temperature
0
•
Remaining Time
•
Temperature / Remaining time
•
A
value / Remaining time
0
•
A
value / Remaining time / Temperature
0
If an alternative with more than one parameter is selected, the
parameters will be displayed alternately. The A
remains at 0 until the thermal disinfection begins. When the
temperature reaches 85°C, the A0value will increase in line
with the temperature and time.
The display can be set to show one of the following alternatives
•
Max. temperature
•
A
value
0
•
A
value / Max temperature
0
If an alternative with more than one parameter is selected,
the parameters will be displayed alternately.
value always
0
Hide quick links:
Advertisement
Table of Contents
