Arjohuntleigh Bari-Breeze User Manual page 5

Before you connect the system pump to a mains socket, read carefully all the
installation instructions in Section 3 - Installation. The system has been designed to
comply with regulatory safety standards including:
• EN60601-1:1990/A13:1996
• UL60601-1 1st Edition
• CAN/CSA C22.2 No 601.1-M90
• The cover of this product is vapour permeable but not air permeable and may
present a suffocation risk. It is the responsibility of the care provider to ensure
that the user can use this product safely.
• Electrical equipment may be hazardous if misused. The front and rear case of
the pump unit should only be separated by authorised technical personnel.
• Do not use the pump in the presence of flammable gases such as anaesthetic
agents.
Precautions
For your own safety and the safety of the equipment, always take the following
precautions:
• Keep the pump away from sources of liquids and do not immerse in water.
• Do not expose the system, especially the mattress, to naked flames, such as
cigarettes etc.
• Do not store the system in direct sunlight.
• Switch off the electrical supply to the pump by disconnecting the pump from the
mains socket before cleaning and inspection.
• Ensure the system is clean and dry prior to storage.
• Never use sharp objects or electrically heated under blankets on or under the
system.
• Store the pump and mattress in the protective bags supplied.
• Only the pump and mattress combination as indicated by ArjoHuntleigh should
be used. The correct function of the product cannot be guaranteed if the incorrect
pump or mattress combinations are used.
General Safety
Safety Warnings
(iii)