iFIT PRO-FORM 1350 User Manual page 11

7. Orient the Handlebar (7) as shown.
While a second person holds the Handlebar (7)
near the Handlebar Post (6), connect the Upper
Wire (68) to the Lower Wire (69).
Insert the wires into the Handlebar Post (6).
Tip: Avoid pinching the wires. Attach the
Handlebar (7) to the Handlebar Post (6) with
a 5/16" x 3/4" Screw (92) and a 5/16" x 2 1/4"
Screw (81).
8. Orient the Handlebar Cover (8) as shown.
Attach the Handlebar Cover (8) to the Handlebar
(7) with two #8 x 3/4" Screws (94).
Tip: First, insert the front #8 x 3/4" Screw
(94) through the Handlebar (7). Next, set the
Handlebar Cover (8) on the Handlebar and
tighten the front Screw. Then, tighten the rear
#8 x 3/4" Screw (94) into the Handlebar and
the Handlebar Cover.
7
81
Avoid pinching
the wires
8
8
94
Front
11
92
7
68
69
6
7
Rear
94