iFIT PRO-FORM 1350 User Manual page 21

HOW TO USE THE SETTINGS MODE
The console features a settings mode that allows you
to connect the console to your own wireless network
and to log in to your iFit account. The settings mode
also allows you to select the target cadence, select the
unit of measurement, and to turn on and turn off the
display demo mode. You may also be able to select a
language.
1. Select the settings mode.
Turn on the console (see step 1 on page 17).
Next, select the main menu (see step 2 on page
17). Then, select Settings. The settings menu
will appear in the display.
2. Connect to a wireless network.
From the settings menu, select Wi /Login. Then,
select Standard Wi Setup or Advanced Wi Setup.
Note: You must have your own wireless network
and an 802.11b/n router with SSID broadcast
enabled (hidden networks are not supported).
The iFit mode supports unsecured and secured
(WEP, WPA, and WPA2) encryption. A broadband
connection is recommended; performance depends
on connection speed.
If you select Standard Wi Setup, a list of wire-
less networks will appear in the display. Select the
desired network.
Note: It may take a few moments for the list of
networks to appear. You will need to know your
network name (SSID) for the standard setup. If
your network has a password, you will also need to
know the password.
After you select a network, navigation instructions
for the keyboard will appear in the display. View the
navigation instructions and then press the Enter
button.
The keyboard will then appear in the display. Enter
your password (passphrase) and select Done.
Note: If your network does not have a password,
simply select Done.
If you are having problems connecting to the
selected network, make sure that your password is
correct. Note: Passwords are case-sensitive.
The display will inform you when the console has
connected to your wireless network. Press the
Enter button to close the standard setup mode.
Then, press the Enter button to log in to your iFit
account or press the Home button repeatedly to
return to the settings menu or the main menu.
If you select Advanced Wi Setup, a list of wire-
less networks will appear in the display. Select the
desired network. Note: It may take a few moments
for the list of networks to appear.
Note: You will need to know your network name
(SSID), your network password, your IP address,
your netmask, your gateway address, and your
global DNS server for the advanced setup.
After you select a network, navigation instructions
for the keyboard will appear in the display. View the
navigation instructions and then press the Enter
button.
The keyboard will then appear in the display. Enter
your password (passphrase) and select Done.
Repeat these actions to enter your IP address,
your netmask, your gateway address, and your
global DNS.
If you are having problems connecting to the
selected network, make sure that you have entered
case-sensitive information correctly.
The display will inform you when the console has
connected to your wireless network. Press the
Enter button to close the advanced setup mode.
Then, press the Enter button to log in to your iFit
account or press the Home button repeatedly to
return to the settings menu or the main menu.
Note: If you have questions after following
these instructions, go to www.iFit.com/support
for assistance.
21