iFIT PRO-FORM 1350 User Manual page 23

HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
you to update the console  rmware, restore the default
settings, view technical information, perform a network
test, and calibrate the incline.
1. Select the settings mode.
See step 1 on page 21.
2. Select the maintenance mode.
From the settings menu, select Maintenance. The
maintenance menu will appear in the display.
When you select a menu option from the main-
tenance menu, the top of the display will show
information about the model and version of the
training bike.
If the console is connected to the controller of the
training bike, the controller dot will be green; if it is
not, the dot will  ash.
If the training bike is connected to your wireless
network, the network dot will be green; if it is not,
the dot will be black.
3. Update the console firmware.
For the best results, regularly check for  rm-
ware updates.
From the maintenance menu, select Firmware
Update. Press the Enter button to download the
latest  rmware for the console.
IMPORTANT: To avoid damaging the training
bike, do not turn off the power while the firm-
ware is being updated.
The display will show the progress of the update.
When the update is complete, the console will turn
off and then turn back on. If it does not, press the
power switch on the training bike to the off position.
Wait for several seconds, and then press the power
switch to the reset position. It may take a few min-
utes for the console to be ready for use.
4. Restore the default settings.
From the maintenance menu, select Restore
Defaults. Then, press Enter to restore the console
to the original settings from the factory.
After you restore the default settings, press the
Enter button. The display will return to the mainte-
nance menu.
5. View technical information.
From the maintenance menu, select Technical Info.
View the total number of hours that the training
bike has been used, the total distance that has
been pedaled, and other information.
After you view the information, press the Enter
button. The display will return to the maintenance
menu.
6. Perform a network test.
From the maintenance menu, select Network Test.
The console will run a network test and check the
connection status of the console and the training
bike.
After you view the results of the network test, press
the Enter button. The display will return to the
maintenance menu.
7. Calibrate the incline system of the training bike.
From the maintenance menu, select Calibrate
Incline. Then, press the Enter button to calibrate
the incline system.
The training bike will automatically rise to the maxi-
mum incline level, lower to the minimum incline
level, and then return to the starting position. This
will calibrate the incline system.
IMPORTANT: Keep pets, feet, and other objects
away from the training bike while the incline
system is calibrating. In an emergency, press
the Enter button to stop the incline calibration.
When the incline system is calibrated, press the
Enter button to return to the maintenance menu.
8. Exit the maintenance mode.
To exit the maintenance mode, press the Home
button repeatedly.
23