These are the options for Modbus Slave Mode.
Figure 4.7 Port Configuration > Operation > Modbus Slave Mode
The following table describes the items in the previous figure.
Item
Mode
Protocol
Slave Timeout (ms)
Delay Timeout (ms)
ASCII Timeout (ms)
Peer Number
Save
EKI-1200 Series User Manual
Description
Click the drop-down menu to select the port configuration mode:
Modbus Slave Mode or Modbus Master Mode.
Select the protocol of the Slave Mode or Master Mode (RTU or
ASCII).
Specify the time duration in milliseconds for the EKI-1200 Series to
wait for a response after it has issued a command while using
Modbus/RTU or Modbus ASCII. After the timeout is expired and no
response is received, the EKI-1200 Series will regard the com-
mand as failed. Note that the timeout for the host PC must be
greater than the timeout setting here specified, otherwise an error
will occur.
Enter a value to specify the delay timeout.
Enter a value to specify the ASCII timeout.
Click the drop-down menu to select the number of network device
which you want to connect.
Click Save to save the values and update the screen.
60