Figure 4.7 Port Configuration > Operation > Modbus Slave Mode - Advantech EKI-1200-CE Series User Manual

These are the options for Modbus Slave Mode.
Figure 4.7 Port Configuration > Operation > Modbus Slave Mode
The following table describes the items in the previous figure.
Item
Mode
Protocol
Slave Timeout (ms)
Delay Timeout (ms)
ASCII Timeout (ms)
Peer Number
Save
Description
Click the drop-down menu to select the port configuration mode:
Modbus Slave Mode or Modbus Master Mode.
Select the protocol of the Slave Mode or Master Mode (RTU or
ASCII).
Specify the time duration in milliseconds for the EKI-1200-CE
Series to wait for a response after it has issued a command while
using Modbus/RTU or Modbus ASCII. After the timeout is expired
and no response is received, the EKI-1200-CE Series will regard
the command as failed. Note that the timeout for the host PC must
be greater than the timeout setting here specified, otherwise an
error will occur.
Enter a value to specify the delay timeout.
Enter a value to specify the ASCII timeout.
Click the drop-down menu to select the number of network device
which you want to connect.
Click Save to save the values and update the screen.
47 EKI-1200-CE Series User Manual