Table of Contents
Advertisement
3.5.3
Restore to Factory Default Settings
The configuration utility provides the function to restore the serial device server to
factory default settings.
The confirm message will display after clicking Restore to Factory Default Set-
tings. If you really want to restore the serial device sever to factory default settings,
click Yes button to continue.
Power off the serial device server within ten seconds. After reconnecting the power,
all settings will be reset to the factory default. If the power supply remains connected
for more than ten seconds, the serial device server will not be changed.
EKI-1200 Series User Manual
Figure 3.21 Restore to Factory Default Settings
50
Advertisement
Table of Contents
