Edit Custom - ProLights CROMOSPOT250 User Manual

16

3.13 EDIT CUSTOM

• Press the MENU button, select the [Edit] menu voice and press the ENTER button to confirm the choice.
• Edit the custom programs by adjusting the value of [Step], [Pan], [Tilt], [X/Y Speed], [Color], [Gobo1], [Gobo2],
[Gobo2 Rot], [Prism], [Focus], [Dimmer], [Strobe] and [Time].
• Press the ENTER button to confirm.
• Enter [Use] and select [Yes] to run the steps user need.
CROMOSPOT250 will execute all the steps in the custom program and it will stop. To make the fixture to
start over add a last step whose duration is 0 second.
Example
Step1:
Step2:
Step3:
Step4:
Step5:
...
Step255:
NOTE. CROMOSPOT250 will execute all the steps in the custom program in the stand-alone operation mode.
• Go to MENU > [Intro] . Enter [Run] to select the operation mode: [Custom].
CROMOSPOT250
Channel Function in ADVANCED mode
CONTROL
No function
Pan/tilt black activated
(activated after 3 secs)
Pan/tilt black deactivated
(activated after 3 secs)
Auto1 (activated after 3 secs)
14
Auto2 (activated after 3 secs)
Sound 1(activated after 3 secs)
Sound 2(activated after 3 secs)
Test (activated after 3 secs)
No function
Reset (activated after 3 secs)
No function
Time=5 Use= Yes
Time=4 Use= Yes
Time=6 Use= Yes
Time=0 Use= Yes
Time=0 Use= No
... ...
Time=0 Use= No
value
000-019
020-039
040-059
060-079
080-099
100-119
120-139
Custom 140-159
160-179
180-199
200-219
220-255
This step creates a loop
Unused steps
DMX