Editing Custom Programs; Special Function - ProLights ARCLED3144RGBWA User Manual

3.13 EDITING CUSTOM PROGRAMS

To edit the custom programs:
• Press the button MENU so many times until show [EDIT] and press the button ENTER to confirm.
• Select the program [CUSTOM 01- CUSTOM 10] through the button UP/DOWN.
• Each custom program has 30 steps that can be edited.
• Each step allows the creation of a scene using red [RED], green [GREN], blue [BLUE], white [WHITE], amber
[AMBER], strobe [STRB 00-20], time [TIME 000-255] and fade [FADE 000-255].
• Set the value (000 - 255 ), through the button UP/DOWN.
3.14 SPECIAL FUNCTIONS
• Press the button menu and select through the directional buttons the [SETTINGS] mode; and press the
button ENTER to confirm.
It is possible to view to following functions:
UPLOAD
• Select [UPLOAD] to upload the custom programs from the current Master unit to the Slave units.
• In order to activate the upload function the password must be entered. Password is the same as the
main access password.
• When uploading the Master and Slave units will display yellow.
• If an error occurs when uploading the Master and/or Slave units will display red.
• On successful uploading of the custom programs the Master and Slave units will display green.
RESET
• In order to reset custom modesto default values select [RESET].
DIMMER
Enter [Dim] to select dimmer mode and dimmer speed. When dimmer is set to [OFF], the RGBWA and
MASTER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer, [DIM1] is the
faster, while [DIM4] is the slowest.
Note. The factory default setting is [DIM4].
COLOR
[COLOR] is for activate/deactivate the color calibration functions.
- When [RGB TO W] is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2
(RGBW).
- When [COLOR] is set [OFF], on RGB =255, 255, 255 the RGB values are not adjusted and the output is
most powerful.
- When [UC] is selected, the RGB output adjusted to a standard preset universal color which balances
fixtures from different generations.
DERR
Enter to [DERR] to control in case of DMX signal errors.
- [SAVE] saves the latest data DMX on error DMX signal.
- [BLACK] allows you to activate the mode on error DMX blackout.
ARCLED3144RGBWA
17