Maintenance; Cleaning The Unit And Maintenance; Gobos - ProLights CROMOBEAM250 User Manual

Moving heads

Table of Contents

Available languages

- 4 - MAINTENANCE

• Make sure the area below the installation place is free from unwanted persons during setup.

• Switch off the unit, unplug the main cable and wait until the unit has cooled down.

• All screws used for installing the device and any of its parts should be tightly fastened and should not

be corroded.

• Housings, fixations and installation spots (ceiling, trusses, suspensions) should be totally free from any

deformation.

• When the lens is visibly damaged due to cracks or deep scratches, it must be replaced.

• The main cables must be in impeccable condition and should be replaced immediately even when a

small problem is detected.

• In order to protect the device from overheating the cooling fans (if any), and ventilation openings should

be cleaned monthly.

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts

subject to dust and grease deposits. The frequency with which the following operations are to be carried

out depends on various factors, such as the amount of the effects and the quality of the working environ-

ment (air humidity, presence of dust, salinity, etc.). Use a soft cloth dampened with any detergent liquid for

cleaning glass to remove the dirt from the reflectors, from the lenses and filters.

It is recommended that the projector undergoes an annual service by a qualified technician for special

maintenance involving at least the following operations:

General cleaning of internal

Restoring lubrication of all parts subject to friction, using lubricants

General visual check of the internal components, cabling, mechanical parts, etc.

Electrical, photometric and functional checks; eventual repairs.

Warning: we strongly recommend internal cleaning to be carried out by qualified personnel!

Rotating gobo wheel: 7 interchangeble gobos (1 of which dichroic).

CROMOBEAM250

parts..

specifically.

Fig.8

Table of Contents

Table of Contents