Sound Active; Preset Color; Custom Static Color Mixing; Master/Slave Mode - ProLights LUMIPAR7IRTRI User Manual

3.5 SOUND ACTIVE

• Press the button MENU so many times until the display shows [P--], then press the button ENTER.
• Press the button UP/DOWN to select the desired program [P--5 - P--6]. Press the button ENTER to confirm.
• Use the microphone sensitivity adjustment knob (8) to adjust the fixture to react to the beat of the
music.
3.6 PRESET COLORS
• Press the button MENU so many times until the display shows [C--], then press the button ENTER.
• Press the button UP/DOWN to select the desired color preset. Press the button ENTER to confirm set-
ting.
- C1 Red
- C2 Green
- C3 Blue
- C4 Cyan
- C5 Magenta
- C6 Yellow
- C7 White

3.7 CUSTOM STATIC COLOR MIXING

• Press the button MENU so many times until the display shows [U--], then press the button ENTER.
• Press the button UP/DOWN to select the desired color value [000 - 100]. Press the button ENTER to con-
tinue to the next color.
• Press the button UP/DOWN to select the desired color value [000 - 100].
• Continue until the desired mix is obtained.
• Press the button ENTER to save the final color setting.

3.8 MASTER/SLAVE MODE

This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave.
MASTER SETTINGS
• Connect the fixtures with DMX cables
• Use any one of the standalone modes for the master unit.
SLAVE SETTINGS
• Press the button [MENU] so many times until the display shows [3CH] or [7CH], then press the button
ENTER.
• Press the button UP/DOWN to set DMX address to [d001 - d512].
LUMIPAR7 IRTRI
9