Configuring Network - Dahua H1 Quick Start Manual

Parameter
Device Program Version
Signal Intensity
Tamper-proof Cover
Door Detector
Battery Level
Protection Status
Linkage Siren
Linkage Camera
Delete

Configuring Network

The hub supports three network connection modes, including 2G/4G, Wi-Fi and wired network.
Their priority is wired network > Wi-Fi > 2G/4G.
Error! Use the Home tab to apply 标题 1 to the text that you want to app
Device details
Table 3-5 Description
Description
Show the device program version.
Show the signal intensity.
If tamper-proof cover is enabled, the hub gives an alarm when
the tamper-proof cover is moved.
If door detector is enabled, the hub gives an alarm when the
door detector is opened.
Show remaining electricity of the battery.
Show protection status, including Armed and Disarmed.
Tap Linkage Siren, and then tap
enable it. It will activate all the sirens of main device connected
to the accessory.
Tap Linkage Camera, and then tap
enable it. The video image of linkage device will be pushed
after being enabled.
Tap Delete to delete the device.
on the interface to
on the interface to
ear here. 38