Table of Contents
Advertisement
3.1 Installing the Device
The device supports standard rack mount.
Install the rack mount kit on both sides of the switch. See Figure 3-1.
3.2 Wiring
3.2.1 Ethernet Port
10/100/1000 M Base-T Ethernet port adopts standard RJ45 port. Equipped with self-adaptation
function, it can be automatically configured to full duplex/half-duplex operation mode, and
supports MDI/MDI-X self-recognition function of the cable, which means that the switch can use
cross-over cable or straight-through cable to connect terminal device to network device.
The cable connection of RJ45 connector conforms to the standard 568B (1-orange white,
2-orange, 3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).
3 Installation
Figure 3-1 Rack mount
Figure 3-2 Ethernet port pin number
Figure 3-3 Pin description
5
Advertisement
Table of Contents
