Table of Contents
Advertisement
Initialization of a CFast card whose partition style is GPT
If a CFast card is initialized in GPT format by mistake, or when using a GPT-formatted CFast card which was once used in
another personal computer on this product, delete the configuration information of the CFast card first, then initialize the
CFast card in MBR format.
• Do not insert any storage device other than a CFast card when performing the procedure below.
• After completing the following procedure, all the files stored in the CFast card are deleted. All necessary
files in the CFast card must be saved in another personal computer.
1.
Insert a CFast card to the CFast card slot.
2.
Run the command prompt as Administrator.
3.
Run 'diskpart' in the command prompt.
4.
Run 'list disk' in the command prompt.
Check that Disk0 and Disk1 are displayed.
If a storage device other than a CFast card is connected, another disk is displayed. In that case, remove the
storage device and follow the procedure above again.
4 CFast CARD INSTALLATION
46
4.2 Initialization (Format)
Advertisement
Table of Contents
