Operational Specifications - Mitsubishi Electric MELIPC MI5A1P User Manual

Operational specifications

The following shows the operational specifications of this product.
Operating status
The following operating statuses can be set for this product.
• RUN
• STOP
For the method for changing the operating status, refer to the following manual.
MELIPC MI5000 Series User's Manual (Application)
■RUN state
All the functions of this product can run.
■STOP state
Writing data from a user program
*1 It indicates a program using a C Controller module dedicated function.
The following functions are affected by this restriction.
Function
CC-Link IE Field Network function
CC-Link IE Field Network Basic function
For details on each function, refer to the following manual.
MELIPC MI5000 Series User's Manual (Application)
• Even when the operating status of this product is either STOP or RUN, writing data to buffer memory from
MI Configurator, SMLP communication, and MELSEC data link function are available.
• Even when the operating status of this product is either STOP or RUN, the data processing in a user
program is performed. To divide the program processing according to the operating status, use the C
Controller module dedicated function (CCPU_GetCpuStatus). (MELIPC MI5000 Series Programming
Manual (VxWorks))
*1
to buffer memory is disabled.
Description
When STOP/RUN state is changed to STOP, select whether to clear or retain the output of cyclic data.
APPX
Appendix 3 Product Specifications
A
121