Mitsubishi Electric MELIPC MI5A1P User Manual page 150

5.
Select the initialization to be run using the SELECT switches (/)(5).
• Setting initialization function: Vx Initialization
• Script initialization function: Script Initialization
6.
Press the OK switch (6).
7.
The selected initialization is run.
During initialization, the states of the main LED and dot matrix LED of this product are as follows.
• MAIN RUN LED: lit green
• Dot matrix LED: 'Running' is displayed
8.
Make sure that initialization is completed, and then turn OFF the power supply of this product.
When initialization is completed, the statuses of the main LED and dot matrix LED of this product are as follows.
• MAIN RUN LED: Off
• Dot matrix LED: 'OK' is displayed
If an error ends initialization
If an error ends initialization of this product, the MAIN ERR LED flashes in red, and a value corresponding to the error appears
on the dot matrix LED. In addition, a system error occurred if only the MAIN ERR LED flashes.
Function
Setting initialization
function
(Vx Initialization)
Script initialization
function
(Script Initialization)
If an error ended initialization, initialize again. If an error occurs again, this product may be malfunctioning. Consult your local
Mitsubishi representative.
APPX
148
Appendix 7 Product Initialization
(5)
(6)
Dot matrix LED Cause
display
1001 Initialization has failed.
1101 Script initialization has failed.
Corrective action
Initialize again.